A silo on a farm is more than a container for feed or grain. It decides whether the contents are still as good after a few weeks as on the day they were delivered, how much maintenance you will have, and how easily the silo connects to the rest of your equipment. When choosing a silo, most farmers first decide between two materials: galvanised steel and glass-fibre reinforced polyester. Both have their place, as long as the purpose is clear.
What goes into the silo, and how much of it
The first question is not the material but the contents. Your own grain from the harvest, kept until the next season, is stored differently from a bought-in compound feed that the supplier delivers every few weeks and the animals use up as it comes.
Steel silos made of galvanised sheet are used mainly for larger quantities of grain. HIMEL builds outdoor silos in sizes from 5 to 15,000 tonnes, round silos for indoor installation up to around 300 tonnes, and modular silos in galvanised sheet with capacities from 0.3 to 67 m³. For stores holding hundreds of tonnes, steel is usually the first choice.
Polyester silos are the typical answer for compound feed, pellets and minerals next to the barn. The Italian manufacturer Agritech states in its brochure that its silos suit a very wide range of materials, from grain, pellets and flour to powdered and granular products. In its vertical joint series (SIV) it offers models from 4 to 75 m³, which according to its table corresponds to 2.4 to 45 tonnes of contents. HIMEL polyester silos for compound feed range from 4 to 31 m³.
Condensation: the biggest difference in practice
A steel wall heats up quickly in the sun and cools just as quickly at night. Warm, humid air inside the silo cools against the cold wall, the moisture condenses and dampens the layer of feed along the wall. That is where the feed starts to cake into lumps, which hinder emptying, and in the worst case mould appears.
According to the manufacturer, glass-fibre reinforced polyester insulates well, so temperature swings inside are smaller and there is less condensation. With steel grain silos the problem is tackled differently, through aeration. HIMEL offers fans and galvanised aeration ducts for this, designed for silos of every size and shape. If you plan a grain silo without aeration, expect more trouble with moisture.
Hygiene and keeping an eye on the contents
With feed that is replaced in the silo every few weeks, it matters that the silo empties completely and that no old layers stay stuck to the walls. HIMEL states that the discharge hopper of its polyester silos is made particularly smooth, which improves the flow. A smooth wall is also easier to clean.
The second practical advantage is translucency. With a polyester silo you can see through the wall how much feed is left, so there is no need to climb the ladder or guess when to order the next delivery. With steel silos you check the level through an inspection window, a hatch or a level sensor.
Service life and maintenance
Polyester does not corrode or oxidise, which is why Agritech cites a long service life without any particular maintenance of the shell. On HIMEL polyester silos, the joints at the transition to the discharge hopper and at the lid are welded watertight, and a rain drip edge on the horizontal joint stops water from running down to the outlet and the auger.
Steel silos made of good galvanised sheet are stable and have a long service life as long as the zinc coating is intact. Scratches during assembly and constant contact with aggressive substances speed up corrosion, so protect damaged spots in good time. Whatever the material, bolted joints, the lid, the ladder and the outlet should be inspected regularly.
How to think about cost
We do not quote prices here, because they depend on size, equipment and installation. The logic, however, is simple. For small and medium quantities of feed with a fast turnover, polyester silos are practical, and HIMEL can deliver them ready assembled, which shortens installation. For larger quantities of grain, the cost per tonne of storage space falls with steel silos, and the modular and round silos are also designed for self-assembly.
Include everything around the silo in your calculation: the foundation, filling, discharge and conveying to the animals. A silo that cannot be connected to your existing auger conveyors can end up costing more than a pricier one that fits in without modifications. For new buildings it therefore makes sense to place the silo already at the stage of planning the barn.
In short:
- Your own grain in larger quantities, stored for several months: a steel silo with aeration.
- Compound feed and pellets next to the barn with frequent deliveries: a polyester silo.
- Several types of feed, as is common on pig farms: several smaller polyester silos, one for each mix.
Need advice?
HIMEL Maschinen GmbH is a German manufacturer of equipment for storing, conveying and preparing feed, and Kancler Sistem Pro is its Slovenian partner for sales and installation. You can find more about the manufacturer on the HIMEL website.
If you are deciding between a steel and a polyester silo, send us a short message with the type of feed and the daily consumption, and we will suggest a suitable solution. We also share news and examples from practice on our Facebook page.

